PRODUCT INFORMATIONS

RIGENERALEGNO is a water based primer for exteriors devised for the revival of deteriorated wooden end items. RIGENERALEGNO is a coloured pigmented primer similar to “pine wood” which lightens & uniforms old dark/silvery wood, varnishes & synthetic enamels. RIGENERALEGNO offers a low filling power which enhances the natural beauty of the veins in aged wood. Two finishes are possible: a transparent coloured finish (which preserves the wood’s natural colour) or a different shade as desired.  RIGENERALEGNO inhibits the damage caused by UV rays on “lignin” as well as mould and fungi growth resulting in an extended service-life. It is flameproof, odourless & not hazardous to health, therefore it is particulary suitable for interiors and poorly aired premises.

KEY INFORMATION     

	10-12% in water volume
	Approx. 6 m2/l with 1 layer
	Family 1 · class A TDS n°30 MSDS n°449
	recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• Bare wooden surfaces
  • Sand thoroughly following the vein & apply RIGENERALEGNO
  • ARD LASUR 0.453. (exterior finish) 
  • TEMA FINITURA CERATA PER LEGNO 0.442.  (interior finish)
• Wooden surfaces treated with enamels or unsound paintwork
  • Sand any old layers of varnish thoroughly. The revival of grained wood is possible only if the natural veins are visible.
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors.
  • Appliy RIGENERALEGNO 0.442.
  • ARD LASUR 0.453.(exterior finish)
  • TEMA FINITURA CERATA PER LEGNO 0.442.(interior finish)

PRODUCT INFORMATION

TEMA PITTURA OPACA RIEMPITIVA DI FONDO is based on acrylic resins in aqueous dispersion. It spreads well & dries rapidly offering optimum covering power, elasticity & sanding. TEMA PITTURA OPACA RIEMPITIVA DI FONDO does not contain hazardous substances, its flameproof & odourless therefore, ideal for poorly aired interiors. Its suitable as a filler for wooden surfaces and mural substrates. Thanks to the acrylic nature of the binder, which guarantees long-lasting elasticity, TEMA PITTURA OPACA RIEMPITIVA DI FONDO  is also suitable for exteriors.

KEY INFORMATION

	5-8% in water volume
	5-8% in water volume
	Approx. 9 m2/l with 1 layer
	Family1 · class A TDS n°36 MSDS n°028
	Allow 6 hrs before sanding & recoating

APPLICATION METHOD & SURFACE PREPARATION

• Bare wooden surfaces
  • DILUENTE NITRO EXTRA 0.972. (to degrease resinous wood after sanding)
• Wooden surfaces treated with enamels or unsound paintwork
  • DILUENTE NITRO EXTRA 0.972. (to degrease resinous wood before sanding)
• Mural surfaces
  • ARDFIX 0.070.
• Very chalky walls
  • ISOLEX 0.081.
• Interior wooden surfaces & walls
  • LITOSTUCCO 1.050. (for imperfections)
     

PRODUCT INFORMATION

ARDEOLITE is a filler coat based on synthetic resins. It dries rapidly, spreads well & sanding is excellent. It’s a perfect dressing primer for wooden surfaces. It can also be used as a filler coat for interior end items in cast iron (radiators) treated with rust inhibitors.

KEY INFORMATION

	7-8% in volume of ACQUARAGIA INODORE 0.970.
	8% in volume of DILUENTE SINTETICO RAPIDO 0.976.
	Approx. 11 m2/l with 1 layer
	Family· class A TDS n°35 MSDS n°022
	12 h before sanding & recoating

APPLICATION METHOD & SURFACE PREPARATION

• New wooden surfaces
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors 
  • Thoroughly sand the substrate
• Varnished wooden surfaces
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors 
  • Thoroughly sand the substrate
• Iron or cast iron surfaces
  • Degrease with DILUENTE NITRO EXTRA 0.972.
  • ARDINOX 0.032.

The hues indicated in the colour range have been devised to optimize coverage when finishing with difficult hues (refer to the formulary).

PRODUCT INFORMATION

BASE is an anticorrosive filler paint for interior/exterior iron & wooden surfaces. It features excellent filling & spreading power, good adherence, sanding & surface/through drying. Its anti corrosion properties make it the ideal product for application on iron/cast iron (e.g., radiators).

KEY INFORMATION

	6-8% in volume of ACQUARAGIA INODORE 0.970.
	8% in volume of DILUENTE SINTETICO RAPIDO 0.976.
	Approx. 11 m2/l con 1 strato
	Family 1 · class A TDS n°31 MSDS n°025
	24 h before sanding & recoating

APPLICATION METHOD & SURFACE PREPARATION

• Bare wooden surfaces
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors.
  • Thoroughly sand the substrate
• Iron or cast iron surfaces
  • Remove any rust and/or flaking metal using a metal brush.
  • Degrease and sand throughly.

The hues indicated in the colour range have been devised to optimize coverage when finishing with difficult hues (refer to the formulary)

PRODUCT INFORMATION

OVER ANTIRUGGINE is a water based product formulated with high levels of anti-corrosive pigments. It does not contain substances hazardous to health or unpleasant odours. It is therefore particularly suitable for interiors or poorly aired premises. The binder employed offers a remarkable substrate wettability and low  water permeability resulting in a water penetration resistance & corrosion similar to the traditional solvent based rustproof products. 

OVER ANTIRUGGINE is ideal for items in iron (interiors & exteriors); it is the perfect primer for the latest generation of water-dilutable enamels “OVER” & the traditional TEMA line

KEY INFORMATION

	5-10% in water volume
	5%  in water volume
	approx. 7,5 m2/l with 2 layers
	Family 2 · class A TDS n°29 MSDS n°039
	recoatable after 12 h

APPLICATION METHOD & SURFACE PREPARATION

• Bare iron surfaces
  • Remove any rust and/or flaking metal using a metal brush. 
  • Degrease and sand throughly.
• Painted surfaces
  • Degrease and remove any unsound parts

PRODUCT INFORMATION

ARDINOX is a synthetic rust inhibitor based on alkyd resins & zinc phosphate. It features remarkable hiding power, outstanding flow and ease of application. Its ideal for corrosion protection on any kind of ironwork,  especially when brush application is required (gates, railings, radiators etc.).

KEY INFORMATION

	9-10% in volume of ACQUARAGIA INODORE 0.970.
	10% in volume of DILUENTE SINTETICO RAPIDO 0.976.
	Approx. 17 m2/l with 1 layer
	Family 2 · class A TDS n°27 MSDS n°032
	recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• Bare iron surface
  • Remove any rust and/or flaking metal using a metal brush.
  • Degrease and sand thoroughly.
• Unsound paintwork
  • Remove rust and unsound paintwork

PRODUCT INFORMATION

ANTIRUGGINE ALCHIDICA  is an anti-corrosive synthetic oil primer. The remarkable dry residue, together with good wettability, adhesion and elasticity offer good results & adequate protection. Its ideal for protecting any kind of ironwork, especially when brush application is required (gates, rails, radiators etc.).

KEY INFORMATION

	9-10% in volume of ACQUARAGIA INODORE 0.970.
	10% in volume of DILUENTE SINTETICO RAPIDO 0.976.
	Approx. 15 m2/l with 1 layer
	Family 2 · class A TDS n°33 MSDS n°035
	Recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• Bare iron surfaces
  • Remove any rust and/or flaking metal using a metal brush. Degrease and sand thoroughly.
• Unsound paintwork
  • Remove rust and unsound paintwork.

PRODUCT INFORMATION

PRIMER UNIVERSALE has been devised to resolve the problem of adhesion on difficult surfaces such as zincked iron, brass, aluminium, cast iron and metal surfaces in general. Adhesion on plastics (prior testing) is also optimum. The anticorrosive properties are guaranteed by the remarkable amount of active pigments. The particular blend of resins make the product highly recoatable with a wide range of enamels (nitrocellulose, brush synthetics, water based enamels, bi-component polyurethane). PRIMER UNIVERSALE is a universal filler coat which offers a remarkable adhesion, rapid drying, good covering power and versatile application.

KEY INFORMATION

	ready to use
	ready to use
	Approx. 16 m2/l with 1 layer
	Family 2 · class A TDS n°44 MSDS n°006
	Recoatable after 24 h (allow 4h for nitrosythetic enamels)

APPLICATION METHOD & SURFACE PREPARATION

• Bare iron or cast iron surfaces
  • Remove any rust and/or flaking metal using a metal brush.
  • Degrease and sand thoroughly
• Other metal surfaces
  • Degrease with DILUENTE NITRO EXTRA 0.972.
• Plastic surfaces
  • Degrease and sand
• Painted surfaces
  • Degrease and remove any unsound parts

The hues indicated in the colour range have been devised to optimize coverage when finishing with difficult hues (refer to the formulary).

PRODUCT INFORMATION

A rust inhibiting primer based on nitrocellulose & synthetic resins featuring fast drying & covering power.  Its ideal for varnishing cycles when employng ARDLUX 0.141 for interior iron end items such as, machine tools, shelving, metal furniture etc.

KEY INFORMATION

	40-50% in volume of DILUENTE NITRO EXTRA 0.972.
	circa 9,5 m2/l with 1 layer
	Family 2 · class A TDS n°37 MSDS n°040
	Recoatable after 4 h

APPLICATION METHOD & SURFACE PREPARATION

• Bare iron or cast iron surfaces
  • Remove any rust and/or flaking metal using a metal brush.
  • Degrease and sand thoroughly.

PRODUCT INFORMATION

FERR-NET is a product in emulsion which reacts with rust forming an anchored inert metal  organic compound filler ideal as a substrate for painting. FERR-NET transforms rust & arrests spreading, eliminating the dusty & often difficult processes of sanding & brushing. It can also be applied to rust free iron surfaces in order to impede formation of the same. It’s the perfect product for gates, gutters, radiators. car bodies, metal furniture, household appliances etc. Once applied it resists against oil, petrol and thermal excursions.

KEY INFORMATION

	ready to use
	Approx. 12 m2/l
	Family 4 · class A TDS n°182 MSDS n°922
	Allow 2h between 2 layer Recoatable after 24-48h

APPLICATION METHOD & SURFACE PREPARATION

• Rusty surfaces
  • Remove any rust and/or flaking metal using a metal brush. Degrease and sand thoroughly.

PRODUCT INFORMATION

ARDFIX is an impregnating primer for interior/exterior walls featuring an optimum binding power, alkali & water resistance. The minimum dimension of the particles in emulsion facilitates the penetration into the superficial pores. Following evaporation, a resistant film is created which impedes the chalking & decay of unsound plaster favouring the adherence of the finishing products on the consolidated substrate. ARDFIX also blocks the alkalinity on new cement concrete, reduces & uniforms the absorption of the mural surface resulting in improved aesthetics. These remarkable properties make ARDFIX an excellent primer for  emulsion paint  & hydro-plastic finishes.

KEY INFORMATION

	dilute 1 part of ARDFIX  in 8 parts of water
	Approx. 25 m2/l
	Family 3 · class A TDS n°94 MSDS n°070
	Recoatable after 4 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat mould with ARDSAN RISANANTE MURALE 0.916.
• Exterior mural surfaces:
  • Treat any imperfections with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
• Interior mural surfaces
  • Treat any imperfections with LITOSTUCCO 1.050.

PRODUCT INFORMATION

The ARDSALUS line is formulated with non toxic raw materials in order to protect the health of those living/working in painted premises & the environment in general. The products are odourless as they are free of solvents, plasticizers, heavy metals & harmful substances. This product blocks residual alkalinity on new plaster,  reduces & uniforms the absorption of the mural surface resulting in improved aesthetics. ARDSALUS IMPREGNANTE is the perfect primer for the ARDSALUS line & emulsion paints in general. 

KEY INFORMATION

	dilute 1 part of ARDSALUS  in 4 parts of water
	Approx. 15 m2/l
	Family 3 · class A TDS n°200 MSDS n°072
	recoatable after 4 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat moulds, moss & bacterial infestation  with SPRAY SAN 0.911. or ARDSAN RISANANTE MURALE 0.916. 
• Bare interior surfaces
  • Treat any imperfections with LITOSTUCCO 1.050.
• Sound interior surfaces painted with washable emulsion paints or distemper 
  • Treat any imperfections with LITOSTUCCO 1.050.
• Unsound or chalky interior surfaces painted with distemper
  • Scrape to remove any unsound paintwork

PRODUCT INFORMATION

ISOLEX is an impregnating primer for interior/exterior walls which, thanks to an attentive choice of solvents, offers a deep penetration through the superficial pores. As the solvents evaporate a strong & lasting film is formed. This film inhibits chalking and the decaying process of unsound plaster  favouring the adherence of the finishing products on the consolidated surfaces. ISOLEX  reduces & uniforms surface absorption resulting in an aesthetically pleasing finish. Free of water, it can be applied even at an ambient temperature of below 0°C & stored without particular precautions. ISOLEX is the perfect primer for finishes with emulsion paints or hydro plastic coatings & can be applied on all sorts of surfaces

KEY INFORMATION

	ready to use
	Approx. 5 m2/l
	Family 3 · class A TDS n°112 MSDS n°081
	Recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat mould with ARDSAN RISANANTE MURALE 0.916.
• Exterior mural surfaces
  • Treat any imperfections with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.

PRODUCT INFORMATION

ISOLEX W is an impregnating primer for interior/exterior surfaces which, thanks to the nanometric dimensions of its particles, facilitates deeper penetration in walls. This outstanding process inhibits the chalking & decay of unsound plasters favouring the adherence of the finishing products on the consolidated substrate. ISOLEX W reduces & uniforms the absorption of the mural surface resulting in improved aesthetics. These remarkable properties make ISOLEX W an excellent alternative to the best solvent based insulators. It is therefore an excellent primer when finishing with latex paints or thick coatings.

KEY INFORMATION

	100% in water volume
	approx. 15-18 m2/l
	Family 3 · class A TDS n°96 MSDS n°085
	recoatable after 4 h

APPLICATION METHOD & SURFACE PREPARATION

• Exterior mural surfaces
  • Treat any imperfections with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
• Bare interior mural surfaces
  • Remove any filth and unsound parts
  • Treat any imperfections with LITOSTUCCO 1.050.
• Unsound or chalky interior surfaces painted with distemper
  • Scrape to remove any unsound paintwork 

PRODUCT INFORMATION

When painting interior and exterior walls, an accurate preparation of the substrate is essential if good aesthetics, durability & inexpensive application are to be assured. These properties are even more important when dealing with mineral paints. This product’s fixative, consolidating & sealing properties guarantee an optimum preparation of both old & new plaster for treatment (without altering the mineral characteristics) with the SILREST line of products. ISOREST is also used as a thinner with the SILREST series.

KEY INFORMATION

	100/200% in water volume according to substrate absorption
	Approx. 15 m2/l according to the substrate
	Family 3 · class A TDS n°270 MSDS n°076
	recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat mould with ARDSAN RISANANTE MURALE 0.916.
• Chalky surfaces
  • Apply a layer of ISOREST diluted from 100% to 200% in water volume
• Surfaces painted with old lime paints
  • Remove any unsound paintwork and apply a layer of ISOREST.

PRODUCT INFORMATION

SILIARD PRIMER W is an impregnating primer for exterior walls  based on special acrylic resins & polysiloxanics in emulsion. SILIARD PRIMER W reduces the absorption of the substrate, and evens the surface thus improving the final aesthetics. The siloxanic component makes it water repellent reducing the amount of water absorbed by the mineral substrates. SILIARD PRIMER W is the perfect primer  for chalk free walls when finishing with the Siliard line ( protection & decoration of listed facades) featuring low water vapour diffusion resistance. It is also suitable when a reduced water absorption of the substrate is required, as is the case of silicate paints & plastic coatings.

KEY INFORMATION

	50/100% in water volume
	Approx. 5 m2/l
	Family 3 · class A TDS n°210 MSDS n°077
	recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat mould with ARDSAN RISANANTE MURALE 0.916.
• Bare exterior mural surfaces
  • Remove any filth & unsound parts.
  • Treat any imperfection with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
• Surfaces painted with synthetic or mineral paints
•  
• We recommend using the SILIARD PRIMER 0.082.  (refer to the TDS 110)

PRODUCT INFORMATION

 ISOLEX W is an impregnating primer for interior/exterior surfaces which, thanks to the nanometric dimensions of its particles, facilitates deeper penetration in walls. This outstanding process inhibits the chalking & decay of unsound plasters favouring the adherence of the finishing products on the consolidated substrate. ISOLEX W reduces & uniforms the absorption of the mural surface resulting in improved aesthetics. These remarkable properties make ISOLEX W an excellent alternative to the best solvent based insulators. It is therefore an excellent primer when finishing with latex paints or thick coatings. 

KEY INFORMATION

	ready to use
	approx. 4,5 m2/l
	Family 3 · class A TDS n°110 MSDS n°082
	recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• Exterior mural surfaces
  • Treat any imperfections with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
• Bare interior mural surfaces
  • Remove any filth and unsound parts
  • Treat any imperfections with LITOSTUCCO 1.050.
• Unsound or chalky interior surfaces painted with distemper
  • Scrape to remove any unsound paintwork 

PRODUCT INFORMATION

CREATIVE FONDO is a smooth pigmented primer based on copolymers in aqueous dispersion which make it the perfect top coat for the CREATIVE line of decorative products. CREATIVE FONDO offers an optimum bond to mineral surfaces & appealing aesthetics unrealizable with normal latex paints. Its brushability, covering & uniforming power are remarkable and it is also odourless.

KEY INFORMATION

	20-30% in water volume
	15-20% in water volume
	Approx. 7 m2/l with 2 layers
	Family 3 · class B TDS n°134 MSDS n°073
	4 h interval between layers. Recoatable after 8 h

APPLICATION METHOD & SURFACE PREPARATION

• Unsound surfaces:
  • Remove filth and unsound parts.
  • LITOSTUCCO 1.050. (to even any imperfections).
  • ARDFIX 0.070.
• Bare interior surfaces & distemper paintwork:
  • Remove filth and unsound parts.
  • LITOSTUCCO 1.050. (to even any imperfections).
• Interior surfaces with washable latex paintwork:
  • Remove filth and unsound parts.
  • LITOSTUCCO 1.050. (to even any imperfections).

PRODUCT INFORMATION

BIANCOFIX is an impregnating pigmented primer suitable as an undercoat, for emulsion paints and plastic coatings. Apart from the normal properties found in impregnating agents (substrate penetration, sealing effect, alkalinity barrier on concrete)  the hiding power of this product is such that one of the finishing coats can be saved.

BIANCOFIX can be applied on any mineral support. Its use is particularly advantageous on smooth & compact surfaces (such as plaster & plasterboard); on walls with traces of puttying & patching, on surfaces with radiator smudges or which have been painted with dark colours.

KEY INFORMATION

	ready to use. 10%in water volume with absorbant surfaces.
	Approx. 8,5 m2/l with 1 layer
	Family 3 · class B TDS n°95 MSDS n°079
	Recoatable after 4 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat moulds, moss  & bacterial infestation  with 
  • ARDSAN RISANANTE MURALE 0.916. or SPRAY SAN 0.911.
• Exterior mural surfaces
  • Remove any filth and unsound parts  
  • Treat any imperfections with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
• Interior surfaces 
  • Remove any filth and unsound parts
  • Treat any imperfections with LITOSTUCCO 1.050.
  • Treat distemper paintwork, unsound & chalky surfaces with ARDFIX 0.070.
•  
• The hues indicated in the colour range have been devised to optimize coverage when finishing with difficult hues (refer to the formulary).

PRODUCT INFORMATION

PRIMER RIEMPITIVO COPRENTE is a pigmented sealer suitable for the preparation of interior/exterior mural surfaces to be finished with traditional emulsion or textured paints. It offers a remarkable filling power, optimum hiding power & anchorage. In fact,  its fixative and hiding power is often such that one of the finishing coats can be saved.  PRIMER RIEMPITIVO COPRENTE is ideal for application on lime cement mortar plaster, chalky primers and plasterboard panels. The application on plasterboard is particularly effective as it produces a rough surface  favouring the adhesion of the subsequent layers. PRIMER RIEMPITIVO COPRENTE is also suitable for smooting stucco work & the recoating of surfaces painted with strong colours.

KEY INFORMATION

	15-20%  in water volume
	10-15%  in water volume
	Approx. 6 m2/l with 1 layer
	Family 3 · class B TDS n°260 MSDS n°075
	recoatable after 4 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat mould  with ARDSAN RISANANTE MURALE 0.916.  
• Exterior mural surfaces
  • Remove any filth and unsound parts  
  • Treat any imperfections with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
  • Treat chalky surfaces with ISOLEX 0.081.
• Interior surfaces
  • Remove any filth and unsound parts
  • Treat any imperfections with LITOSTUCCO 1.050.
  • Treat distemper paintwork, unsound & chalky surfaces with ARDFIX 0.070.

The hues indicated in the colour range have been devised to optimize coverage when finishing with difficult hues (refer to the formulary).

PRODUCT INFORMATION

RASANTE A PENNELLO is a rough pigmented primer suitable for smoothing interior & exterior surfaces to be finished with traditional emulsion paints, decorative effects & thick coatings. It offers a remarkable filling/hiding power, alkali inertia, anchorage & adhesion on any clean/dry mural surface. RASANTE A PENNELLO is ideal for interior application on plasterboard & smooth chalky/lime surfaces. It also improves the final aesthetics of surfaces with repair areas & imperfections. At the same time, it can also be applied externally to roughen smooth surfaces such as cement slabs & concrete parts. RASANTE A PENNELLO is ideal for smoothing & filling substrates characterized by static micro-cracks & as a primer to reproduce antique like hazes.

KEY INFORMATION

	12-15%  in water volume
	Approx. 3,7 m2/l with 1 layer
	Family 3 · class B TDS n°263 MSDS n°084
	recoatable after dopo 4 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat mould  with ARDSAN RISANANTE MURALE 0.916.
• Exterior mural surfaces
  • Remove any filth and unsound parts  
  • Treat any imperfections with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
  • Treat chalky surfaces with ISOLEX 0.081.
• Interior surfaces
  • Remove any filth and unsound parts
  • Treat any imperfections with LITOSTUCCO 1.050.
  • Treat distemper paintwork, unsound & chalky surfaces with ARDFIX 0.070.

The hues indicated in the colour range have been devised to optimize coverage when finishing with difficult hues (refer to the formulary).

PRODUCT INFORMATION

RASARD is a rough pigmented primer suitable for smoothing exterior walls to be finished with traditional emulsion paints or thick coatings. RASARD features an excellent filling power which uniforms irregular surfaces such as those found during restoration work. It also offers an optimum hiding power, resistance to alkali, adhesion & anchorage which lends a rough aspect similar to two coat plaster work. Thanks to these features it can be used to roughen smooth surfaces such as cement slabs & concrete parts. RASARD  is ideal for filling substrates with static micro-cracks & as a primer to reproduce antique-effect rustic hazes.

KEY INFORMATION

	5-10%  in water volume
	5-10%  in water volume
	circa 2 m2/l with 1 layer
	Family 3 · class B TDS n°261 MSDS n°083
	Recoatable after 4 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat mould  with ARDSAN RISANANTE MURALE 0.916. 
• Exterior mural surfaces
  • Treat moulds, moss  & bacterial infestation  with ARDSAN RISANANTE MURALE 0.916. or SPRAY SAN 0.911.  
  • Treat any patching, holes or cracks with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
  • Treat chalky surfaces with ISOLEX 0.081.

The hues indicated in the colour range have been devised to optimize coverage when finishing with difficult hues (refer to the formulary).

PRODUCT INFORMATION

PAINTGUM 7 FONDO COPRENTE is a primer based on pigments, selected mineral fillers & mild odour solvents. The amount of binder & the use of solvents offer a deep penetration through the substrate’s capillary network.

PG 7 FONDO COPRENTE consolidates unsound mural surfaces in depth & adheres firmly even to extremely compact substrates. 

The optimum covering power uniforms heterogeneous cromatics, regulates the absorption of the substrate  & creates the best conditions for the finishings. PG 7 FONDO COPRENTE resists against mould and micro-organisms, does not contain water  & can be applied & stored at temperatures as low as O°C.

KEY INFORMATION

	25-30%  in volume of ACQUARAGIA INODORE 0.970.
	13-18%  in volume of ACQUARAGIA INODORE 0.970.
	Approx. 8 m2/l with 1 layer
	Family 3 · class B TDS n°198 MSDS n°584
	Recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat mould  with ARDSAN RISANANTE MURALE 0.916.  
• Chalk free surfaces
  • Treat any patching, holes or cracks with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
  • Treat stucco work with ISOLEX 0.081.
• Chalky surfaces
  • Remove any unsound paintwork & efflorescence.
  • Treat any patching, holes or cracks with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
  • ISOLEX 0.081.

The hues indicated in the colour range have been devised to optimize coverage when finishing with difficult hues (refer to the formulary).

PRODUCT INFORMATION

PAINTGUM 7 FILL is a primer for exteriors based on unsaponifiablebinders, mineral sands with selected granulometry & mild odour solvents. The high binder content & the use of solvents with appropriate superficial tension, offer an outstanding penetration even in the deepest areas, through the substrate’s capillary network. This product therefore consolidates unsound mural surfaces in depth & adheres firmly even to extremely compact substrates. The optimum filling power uniforms heterogeneous rugosity and  regulates the absorption of the substrate creating the best conditions for finishes. These remarkable properties make PAINTGUM 7 FILL the perfect product for patchy surfaces in reinforcement concrete and prefabs.

INDICAZIONI VARIE

	20-25%  in volume of ACQUARAGIA INODORE 0.970.
	15-20%  in volume of ACQUARAGIA INODORE 0.970.
	Approx. 4,6 m2/l with 1 layer
	Family 3 · class B TDS n°199 MSDS n°585
	Recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• • Treat mould  with ARDSAN RISANANTE MURALE 0.916.  
• Chalk free surfaces
  • Treat any patching, holes or cracks with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
  • Treat stucco work with ISOLEX 0.081.
• Chalky surfaces
  • Remove any unsound paintwork & efflorescence.
  • Treat any patching, holes or cracks with ARDPLAN AS 1.965. or ARDPLAN BS 1.962.
  • ISOLEX 0.081.

The hues indicated in the colour range have been devised to optimize coverage when finishing with difficult hues (refer to the formulary).

PRODUCT INFORMATION

PRIMER MURALE is a particular product based on mineral salts & specific additives in concentrated aqueous solution. Its versatile performance offers an optimum solution to the most common  problems such as:

Patching: PRIMER MURALE is ideal for the pre-treatment of surfaces with patches of smoke, nicotine, soot, damp etc.  

Sealing: optimum combination of penetration & impregnation reducing the the surfaces’ absorption.

Consolidation: the crystallization of the salts in the plaster’s capillary network arrests the chalking & decaying process of mineral surfaces.

PRIMER MURALE is suitable for interior & exterior surfaces in cement/lime plaster, plaster of Paris, plasterboard & old sound paintwork. 

KEY INFORMATION

	ready to use
	ready to use
	Approx. 9 m2/l
	Family 3 · class C TDS n°177 MSDS n°074
	Recoatable after 24 h

APPLICATION METHOD & SURFACE PREPARATION

• Bare mural surfaces
  • Clean thoroughly removing any dust, filth or unsound parts.

PRODUCT INFORMATION

NEOARD is a quality enamel based on special alkyd resins & lightfast outdoor-resistant pigments.

It features an outstanding colourfastness, gloss, elasticity, adherence together with good anticorrosive properties & scratch resistance.

NEOARD is the perfect product for top-class finishes on interior/exterior iron & woodwork.          

KEY INFORMATION

	6% in volume of  ACQUARAGIA INODORE 0.970.
	6% in volume of  ACQUARAGIA INODORE 0.970.
	6% in volume of DILUENTE SINTETICO RAPIDO 0.976. (12-13% neoard alluminio)
	Approx. 9 m2/l with 2 layers (13 m2/l neoard alluminio)
	Family 4 · class A TDS n°3 e TDS n°23 MSDS n°154
	Allow 24 h between layers

APPLICATION METHOD & SURFACE PREPARATION

• Bare iron surfaces
  • Remove any rust and/or flaking metal using a metal brush.
  • Degrease and sand thoroughly with ARDINOX 0.032.
• Painted & unsound iron surfaces
  • Remove any rust and unsound paintwork with ARDINOX 0.032. or BASE 0.025.
• Bare wooden surfaces
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors.
  • Sand thoroughly.
  • ARDEOLITE 0.022.
• Painted wooden surfaces
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors.
  • Sand thoroughly.

PRODUCT INFORMATION

ARDEOL is a synthetic enamel based on alkyd resins & lightfast pigments. It features a good gloss and hiding power & corrosion protection. Its ideal for finishing both interior & exterior iron or woodwork.

KEY INFORMATION

	6-7% in volume of ACQUARAGIA INODORE 0.970.
	6-7% in volume of ACQUARAGIA INODORE 0.970.
	7% in volume of DILUENTE SINTETICO RAPIDO 0.976.
	Approx. 8,2 m2/l with 2 layers
	Family 4 · class A TDS n°4 MSDS n°151
	Allow 24 h between layers

APPLICATION METHOD & SURFACE PREPARATION

• Bare iron surfaces
  • Remove any rust and/or flaking metal using a metal brush.
  • Degrease and sand thoroughly with ARDINOX 0.032.
• Painted & unsound iron surfaces
  • Remove any rust and unsound paintwork with  ARDINOX 0.032. or BASE 0.025.
• Bare wooden surfaces
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors.
  • Sand thoroughly.
  • ARDEOLITE 0.022.
• Painted wooden surfaces
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors.
  • Sand thoroughly

PRODUCT INFORMATION

ARDSILK is a top quality satiny enamel based on urethaned alkyd resins & anticorrosive pigments.

It is easy to apply, features an excellent flow &  covering power, good adherence & scratch/rust resistance.  

ARDSILK contains special additives which impede the aggressive action caused by UV rays resulting in a pleasant velvet-like effect both on interior/exterior wooden or iron substrates.

KEY INFORMATION

	6% in volume of ACQUARAGIA INODORE 0.970.
	6% in volume of ACQUARAGIA INODORE 0.970.
	6% in volume of DILUENTE SINTETICO RAPIDO 0.976.
	Approx. 8,5 m2/l with 2 layers
	Family 4 · class A TDS n°7 MSDS n°250
	Alow 24 h between layers

APPLICATION METHOD & SURFACE PREPARATION

• Bare iron surfaces
  • Remove any rust and/or flaking metal using a metal brush.
  • Degrease and sand thoroughly with ARDINOX 0.032.
• Painted & unsound iron surface
  • Remove any rust and unsound paintwork with ARDINOX 0.032. or BASE 0.025.
• Bare wooden surfaces
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors.
  • Sand thoroughly.
  • ARDEOLITE 0.022.
• Painted wooden surfaces
  • Use LITOSTUCCO 1.050. for interior stuccoing & a synthetic stucco for exteriors.
  • Sand thoroughly.

PRODUCT INFORMATION

SALVAFERRO is an anticorrosive paint based on particular synthetic resins, zinc phosphate micaceous iron oxide and aluminium laminar, which lend  remarkable barrier/passivating properties.

Its unique metallic effect aesthetics & protective power result in an excellent finishing primer for iron structures such as gates, street lamps, railings, balconies & grates. 

KEY INFORMATION

	7-8%  in volume of ACQUARAGIA INODORE 0.970.
	7-8%  in volume of ACQUARAGIA INODORE 0.970.
	8%  in volume of DILUENTE SINTETICO RAPIDO 0.976.
	Approx. 4,5 m2/l with 2 layers
	Family 4 · class A TDS n°13 e TDS n°17 MSDS n°293, MSDS n°296 e MSDS n°2930000.
	Recoatable after 24 h; Allow 24 h between layers.

APPLICATION METHOD & SURFACE PREPARATION

• Apply a hand of ARDINOX 0.032. for a long-lasting cycle.
• Bare iron surfaces
  • Remove any rust and/or flaking metal using a metal brush
    • Degrease and sand thoroughly.
• Painted & unsound iron surfaces
  • Remove any rust & unsound paintwork
•  
• SALVAFERRO TRASPARENTE is ideal for glossy finishes on surfaces treated with SALVAFERRO, it lends exclusive aesthetics & added protection.
• Thinning: 5-6% in volume with ACQUARAGIA INODORE 0.970. (brush) – 6% in volume with DILUENTE SINTETICO RAPIDO 0.976.
• YIELD: 18m²/l 

PRODUCT INFORMATION

STEELGUARD is a protective coating featuring an optimum resistance to weather extremes and industrial environments. STEELGUARD is the perfect product for the protection and decoration of galvanised sheet iron (roofs, gutters, down-pipes etc.) as it offers long-lasting impermeability, elasticity & substrate adhesion However, its thermoplastic property results in a poor scratch resistance therefore STEELGUARD is not suitable for the decoration of galvanized sheet iron subject to abrasion, scrubbing or compression (blinds, metal furniture/structures which must be packed or stacked).

KEY INFORMATION

	13-15%  in volume of DILUENTE SINTETICO RAPIDO 0.976.
	15%  in volume of DILUENTE SINTETICO RAPIDO 0.976.
	Approx. 7,5 m2/l with 1 layer
	Family 4 · class A TDS n°8 MSDS n°290
	Allow 24-36 h between layers.

APPLICATION METHOD & SURFACE PREPARATION

• Bare zinc surfaces
  • Degrease with DILUENTE NITRO EXTRA 0.972.
• Partially corroded zinc surfaces
  • Remove any trace of rust
  • Degrease with DILUENTE NITRO EXTRA 0.972.
  • PRIMER UNIVERSALE 0.006.
• Zinc surfaces with unsound paintwork
  • Remove any previous paintwork with ARD STRIP 0.921.
  • Degrease with DILUENTE NITRO EXTRA 0.972.

PRODUCT INFORMATION

ARDLUX is a synthetic enamel based on modified alkyd-resins & light-fast coloured pigments. Such components offer exceptionally fast air drying, elasticity, adherence & colour stability. ARDLUX provides a full, hard, glossy & highly covering film which also resists weather agents, fuels & lubricating oils. ARDLUX is ideal for top quality finishes on interior/exterior metal end items (agricultural machines, industrial vehicles, pumps, compressors, shelving, scaffolding, carpentry etc.)

KEY INFORMATION

	6-7%  in volume of DILUENTE SINTETICO RAPIDO 0.976.
	Spray Airless: 9-10%  in volume of DILUENTE NITRO EXTRA 0.972. Air Spray: 18-20%  in volume of DILUENTE NITRO EXTRA 0.972.
	Approx. 10 m2/l With 2 layers (air spray) with 1 layer (airless)
	Family 4 · class A TDS n°12 MSDS n°141
	Allow 25-30 min. between layers

APPLICATION METHOD & SURFACE PREPARATION

• Iron or cast iron surfaces
  • Remove any rust and/or flaking metal using a metal brush
  • Degrease and sand thoroughly
  • ANTIRUGGINE NITRO GRIGIA 0.040.
• Aluminium surfaces, lightweight alloy or galvanized sheet iron
  • PRIMER UNIVERSALE 0.006.

PRODUCT INFORMATION

OVER SATINATO is a professional water dilutable enamel based on particular polyurethane polymers which lend a remarkable scratch -abrasion resistance. The covering power makes it easy to obtain an excellent finish, the duration of which is guaranteed by the optimum resistance to atmospheric agents, adhesion & notable elasticity. The prolonged open time makes OVER SATINATO easy to apply and the originating film offers a good filling power, flow and does not yellow. OVER SATINATO is non-flammable and free of unpleasant odours therefore, ideal for poorly aired rooms & public premises.OVER SATINATO is ideal for the protection of wooden & iron substrates and guarantees a prestigious finish both in & outdoors

KEY INFORMATION

	6% in volume of ACQUARAGIA INODORE 0.970.
	5-10% in water volume
	5% in water volume
	approx. 7,5 m2/l with 2 layers
	Family 4 · class A TDS n°22 MSDS n°232
	allow 24 hours between layers

APPLICATION METHOD & SURFACE PREPARATION

• Iron surfaces
  • Remove any rust and/or flaking metal using a metal brush
  • Degrease with DILUENTE NITRO EXTRA 0.972., ARDINOX 0.032 or OVER ANTIRUGGINE 0.039. and sand thoroughly.
• Bare wooden surfaces
  • Use LITOSTUCCO 1.050 for interior stuccoing & a synthetic stucco for exteriors.
  • Sand thoroughly.
  • TEMA PITTURA OPACA RIEMPITIVA DI FONDO 0.028.
• PVC surfaces
  • Degrease with DILUENTE NITRO EXTRA 0.972. 

PRODUCT INFORMATION

TEMA LUCE is a top-quality water-dilutable enamel formulated with a blend of acrylic polymers in aqueous dispersion & non-toxic lightfast colour pigments. These components lend outstanding resistance to atmospheric agents, excellent colourfastness, remarkable adherence & elasticity. TEMA LUCE is very easy to apply and produces a glossy, full film featuring high opacity and perfect flow. TEMA LUCE is odourless & non-flammable. TEMA LUCE is a universal enamel suitable for top-quality finishes on ironwork, galvanized sheet iron, aluminium, light alloys, woodwork, plastic, asbestos cement & mural surfaces.

KEY INFORMATION

	5-8% in water volume
	1-3% in water volume
	Approx. 7,5 m2/l with 2 layers
	Family 4 · class B TDS n°14 MSDS n°135
	Allow 5-6 h between layers.

APPLICATION METHOD & SURFACE PREPARATION

• Iron surfaces
  • Remove any rust and/or flaking metal using a metal brush
  • Degrease with DILUENTE NITRO EXTRA 0.972., ARDINOX 0.032. or TEMA ANTIRUGGINE 0.037. and sand thoroughly.
• Bare aluminium surfaces, lightweight alloy or galvanized sheet iron
  • Degrease with DILUENTE NITRO EXTRA 0.972.
  • TEMA ANTIRUGGINE 0.037.
• Bare exterior surfaces
  • TEMA PITTURA OPACA RIEMPITIVA DI FONDO 0.028.
• PVC surfaces
  • Degrease with DILUENTE NITRO EXTRA 0.972. 
• Mural surfaces
  • BIANCOFIX 0.079.
• Chalky surfaces
  • ISOLEX 0.081. or ARDFIX 0.070.